Table of Contents
Advertisement
■ S/PDIF Enable defines the outgoing signals as S/PDIF data stream. This is the most
commonly available transfer protocol and is "understood" by most professional and
consumer devices.
■
Copyright adds a (S/PDIF) copy-protection ID to the signal or filters it out when
deactivating copy protection. This function sets the so-called "copy protection bit"
which ensures that no digital copies can be made of the signal. Please note that this
"protection" process, like other similar processes, only provides extremely marginal
protection of your work.
■ Non-Audio adds information to the data stream that defines it as "anything, but not
only audio" so that it can be reproduced in RAW format (e.g. for AC-3 / DVD Audio,
see below).
Master Out.
Indeed, you can use this to control the master volume of the PHASE 28 audio interface.
When doing so, the master controller adjusts all volumes relative to the levels already set
for the individual outputs.
ASIO (Windows).
Programs that support Steinberg's ASIO feature dialogs containing special settings for
these drivers. The properties of the PHASE hardware can be set up in the ASIO Control-
Panel. ASIO and the Nemesys GigaStudio can access the PHASE 28 hardware simulta-
neously (multi-client). To accomplish this, activate the corresponding mode and select
which output pair should be available to which application.
30
PHASE 28 (English)
Advertisement
Table of Contents
