Installation Under Windows Xp - TerraTec PHASE 28 Manual

Installation under Windows XP.

1. Boot your computer after installing the PHASE 28 PCI card.
2. During the boot, the Windows hardware wizard will identify the new hardware as a
"Multimedia Audio Controller". If you have not done so already, insert the PHASE CD-
ROM now. Next, mark the "Install the software automatically [Recommended]" check-
box and click "Next".
3. The hardware wizard will now inform you that it will search for drivers for a "Multimedia
Audio Controller".
4. The following dialog box may appear at this point or later in the installation:
This is no cause for alarm. Click "Yes" to continue. The installation will now be exe-
cuted.
5. In the final window, the hardware wizard will report that the driver software has been
installed successfully. Close the wizard by clicking "Finish".
If contrary to all expectations an additional request should appear for you to perform
some action and you are not sure about it, then pressing the Enter key is generally a safe
action.
If Windows requests a second driver file, please refer to the aforementioned directory on
the PHASE CD-ROM. It is also possible (e.g. if this is the first sound card installation in
your system) that some additional Windows extensions have to be installed. Please have
your Windows CD ready for this purpose.
After successful driver installation, the PHASE 28 ControlPanel can be installed easily
using the autorun option (<CD>:\autorun.exe).
Follow the instructions on the screen to install the various bundled software programs.
The ControlPanel application can also easily be removed from your system. Top do so,
14 PHASE 28 (English)