Appendix A - Technical Data - TerraTec PHASE 28 Manual

Appendix A - Technical Data

■ PCI card
■ Playback of 8 analog channels at up to 24 bit/192 kHz
■ Recording of 2 analog channels at up to 24 bit/192 kHz
■ Symmetrically arranged analog connections, 6.3 mm cinch cord
■ Coaxial digital interface for S/PDIF, AC3 and DTS formats
■ Stereo digital input with up to 24 bit/96 kHz resolution and hardware sampling rate
recognition
■ Stereo digital output with up to 24 bit/192 kHz resolution
■ EWS Connect* connection for synchronized cascading of additional PCI systems
■ Non-Audio mode for transfer of AC3 or DTS streams via the digital interface
■ VU meter for every channel on the ControlPanel display
■ 24 bit/192 kHz A/D converter with 102 dB (A) SNR**, typically 100 dB (A)
■ 24 bit/192 kHz A/D converter with 106 dB (A) SNR**, typically 105 dB (A)
■ 2 gain controllers on the front of the slot plate for setting levels for analog inputs
(adjustment range of -19 dB to +12 dB)
■ 2 clipping LEDs on the front of slot
■ MIDI interface with 16 channels total
■ Input level: 2.1 volts/RMS @ 1 kHz
■ Output level: 2.1 volts/RMS @ 1 kHz
■ Bus master transfer supports 24-bit, 4-byte mode (32 bit)
■ 4 inputs and 10 outputs total
*
Audio systems with a EWS Connect connection can be cascaded and synchronized. Up to four
systems can be controlled with only one driver and one ControlPanel.
**
This information depends on the technical data of the convertor used.
34 PHASE 28 (English)