Table of Contents
Advertisement
Digital interface (S/PDIF, RAW, AC3).
Devices that can process the S/PDIF protocol or Dolby AC3/DTS
signals can be connected to the coaxial digital interface (cinch
plugs, RCA). This includes, for example, DAT recorders and many
HiFi components, or even other computers that you want to con-
nect to the audio network (VST System Link).
If you want to transfer music digitally from the computer to other devices, or record audio
data using the computer, you can do so using the digital interface of the PHASE 28
system. One coaxial (RCA/Cinch) jack is available for both recording and playback.
The cables for digital connections are always connected "crosswise", meaning OUT to IN
and vice-versa. Pulses are transmitted together with the audio data when the S/PDIF
protocol is used. This is known as the sample rate. The interface of the PHASE 28
system can receive rates up to 96,000 Hz and send rates up to 192,000 Hz. You should
keep this difference in mind if you plan to exchange digital data, for example using a
ProTools system or a VST System Link.
The correct driver for recording digital sources is called "PHASE 28 WAVE".
You can find detailed information on the digital interface settings in the PHASE Control-
Panel beginning on Ü page 27.
Practical tip: If possible, use specially shielded RCA cables for
transferring audio data, at least if it is important to have an abso-
lutely clean, jitter-free signal path (for example, when mastering).
Advertisement ;-) TerraTec's Vice Versa is a compact S/PDIF
converter, which allows audio devices to be connected with optical
TOSLink connections to electrical cinch connections– and vice-
versa. This clever switching technique allows you to select
whether to use Vice Versa as a bi-directional converter or as a
signal repeater. For more information, go to www.terratec.com.
20
PHASE 28 (English)
Advertisement
Table of Contents
