Table of Contents
Advertisement
MIDI interface.
The MIDI interface of the PHASE 28 system allows you to connect the device with
properly equipped peripherals such as MIDI keyboards, DAW controllers and countless
other devices. The cables for MIDI connections are always connected "crosswise",
meaning OUT to IN and vice-versa. MIDI sequencer software usually always you to loop
MIDI data through, using the Through function.
Practical tip: Even if your input keyboard (master keyboard) has
a USB connection available, you should use the MIDI input (IN) of
the PHASE 28 system whenever possible: the "direct connection"
to the PCI data bus of the computer, and thus to the MIDI soft-
ware, allows a substantially faster and more stable timing than
most USB-MIDI interfaces. Of course, the same is true for the
output when it is needed.
PHASE 28 (English)
21
Advertisement
Table of Contents
