Motherboard Features - Supermicro Supero C2SBX User Manual

C2SBX/C2SBX+ User's Manual

Motherboard Features

CPU
• Single Intel® Core™2 Extreme, Quad, or Duo processor with an FSB speed
of up to 1600 MHz (for C2SBX+) or up to 1330 MHz (for C2SBX)
Memory
• C2SBX+: Supports Non-ECC unbuffered DDR3 1600 MHz up to 4 GB in two
DIMMs, or DDR3 1333/1066/800 MHz up to 8GB in four DIMMs. When one DDR3
module is used, install it in DIMM2A or DIMM2B. If two DDR3 modules are used,
install these modules in DIMM2A and DIMM2B.
• C2SBX: Supports ECC/Non-ECC unbuffered DDR3 single/dual channel
1333/1066/800 MHz up to 8GB in four DIMMs.
Chipset
• C2SBX+: Intel X48 MCH (North Bridge), ICH9R (South Bridge), and PXH-V
• C2SBX: Intel X38 MCH (North Bridge), ICH9R (South Bridge), and PXH-V
Expansion Slots
• Two (2) PCI-Express x16 (Gen2) (JPE1, JPE2)
• One (1) PCI-Express x1 (JPE3)
• Two (2) PCI-X 133 MHz (JPCIX1, JPCIX2)
• Two (2) 32-bit PCI 33MHz (JPCI1, JPCI2)
BIOS
• 16 Mb Phoenix BIOS
• DMI 2.3, PCI 2.2, ACPI 1.0/2.0, SMBIOS 2.3, and Plug and Play (PnP)
PC Health Monitoring
• Onboard voltage monitors for CPU Core Voltage, Memory Voltage,+1.8V, +3.3V,
+3.3V standby, +5V, Vbat (battery voltage) and ±12V
• Fan status monitor with firmware, PWM (Pulse Width Modulation) 4-pin fan
speed control
• CPU 4-Phase-switching voltage regulator
• Supero Doctor III, Watch Dog, NMI
• Power-up mode control for recovery from AC power loss
• CPU/System overheat LED and control
• System resource alert via Supero Doctor III
• Auto-switching voltage regulator for the CPU core
• CPU Thermal Trip support
• Thermal Monitor 2 (TM2) support
• SMT support
• PECI (Platform Environment Configuration Interface) support
ACPI Features
• Slow blinking LED for suspend state indicator
SPI (Serial Peripheral Interface) Flash BIOS
®
1-8