Returning Merchandise For Service - Supermicro Supero C2SBX User Manual

Question: How do I utilize the onboard HD sound?
Answer: The onboard HD sound available on the C2SBX/C2SBX+ can be
enabled with the audio driver software that was included in your motherboard
package. When activated, sound will be routed through the jacks next to the
LAN Port according to the audio connection descriptions listed on Page 2-8.
You must also set the HD Audio setting to "Auto" in the Advanced Chipset
section of the BIOS setup.
Question: I installed my microphone correctly but I can't record any sound.
What should I do?
Answer: Go to <Start>, <Programs>, <Accessories>, <Entertainment> and
then <Volume Control>. Under the Properties tab, scroll down the list of de-
vices in the menu and check the box beside "Microphone".
Question: How do I connect the ATA100/66 cable to my IDE device(s)?
Answer: The 80-wire/40-pin high-density ATA100/66 IDE cable that came
with your system has two connectors to support two drives. This special cable
must be used to take advantage of the speed the ATA100/66 technology offers.
Connect the blue connector to the onboard IDE header and the other
connector(s) to your hard drive(s). Consult the documentation that came
with your disk drive for details on actual jumper locations and settings.
3-4

Returning Merchandise for Service

A receipt or copy of your invoice marked with the date of purchase is required be-
fore any warranty service will be rendered. You can obtain service by calling your
vendor for a Returned Merchandise Authorization (RMA) number. When returning
to the manufacturer, the RMA number should be prominently displayed on the
outside of the shipping carton, and mailed prepaid or hand-carried. Shipping and
handling charges will be applied for all orders that must be mailed when service
is complete.
This warranty only covers normal consumer use and does not cover damages in-
curred in shipping or from failure due to the alteration, misuse, abuse or improper
maintenance of products.
During the warranty period, contact your distributor first for any product problems.
Chapter 3: Troubleshooting
3-5