Supermicro Supero C2SBX User Manual page 79

System Temperature
This feature displays the absolute system temperature (i.e., 34
Fan1 - Fan 5
If the feature of Auto Fan Control is enabled, the BIOS will automatically display
the status of the fan as specified.
Fan Speed Control Modes
This feature allows the user to decide how the system controls the speeds of the
onboard fans. The CPU temperature and the fan speed are correlative. When
the CPU on-die temperature increases, the fan speed will also increase, and vice
versa. If the option is set to "4-pin", the fan speed will be controlled by Pulse Width
Modulation (PWM). Select "Workstation" if your system is used as a Workstation.
Select "Disable" to disable the fan speed control function to allow the onboard
fans to constantly run at full speed (12V). The Options are: 1. Disable and 2.
Optimized for Workstations with 4-pin.
Note: In the Windows OS environment, the Supero Doctor III settings take pre-
cedence over the BIOS settings. When first installed, Supero Doctor III adopts
the temperature threshold settings previously set in the BIOS. Any subsequent
changes to these thresholds must be made within Supero Doctor, since the
SD III settings override the BIOS settings. For the Windows OS to adopt the
BIOS temperature threshold settings, please change the SDIII settings to be
the same as those set in the BIOS.
Voltage Monitoring
The following items will be monitored and displayed:
Vcore A
VDIMM
-12V/+12V
+5V
+3.3VDD/+3.3Vsb
Vbat
4-19
Chapter 4: BIOS
o
C).