Power Loss Control; Watch Dog - Supermicro Supero C2SBX User Manual

Chapter 4: BIOS
ACPI Mode
Select Yes to use the ACPI (Advanced Configuration and Power Interface)
power management feature on your system. The options are Yes and No.
ACPI Sleep Mode
This feature allows you to decide which ACPI (Advanced Configuration and
Power Interface) power management mode to use when in the sleep mode.
The options are S1, S3 and S1S3.
Power Button Behavior
If set to Instant-Off, the system will power on or power off immediately as
soon as the user hits the power button. The options are Instant-Off and 4-
Second Override.
Resume On Modem Ring
Select On to "wake your system up" when an incoming call is received by your
modem. The options are On and Off.
Resume On PME#
Select On to "wake your system up" from the PME# of PCI slots. The options
are On and Off.
PS2 Keyboard (KB)/Mouse Wake Up
Select Enable to "wake your system up" from the S3, S4 or S5 state. If this
feature is set to Enabled, you will also need to enable the JPWAKE jumper by
closing pins 1-2. (Please refer to Pg. 1-5 and Chapter 2 for more details). The
default setting is Disabled.

Power Loss Control

This setting allows you to choose how the system will react when power returns
after an unexpected loss of power. The options are Stay Off, Power On, and
Last State.

Watch Dog

If enabled, this option will automatically reset the system if the system is not
active for more than 5 minutes. The options are Enabled and Disabled.
Summary Screen
This setting allows you to Enable or Disable the summary screen which displays
the system configuration during bootup.
4-7