Table of Contents
Advertisement
EN
5.11 Spark plug
The spark plug(s) must be replaced every 200
hours of operation (=at every other basic service).
Before disconnecting the spark plug, clean around
its mounting.
Spark plug: Champion RC12YC or equivalent.
Electrode distance: 0.75 mm.
5.12 Air intake
See 10, 11, 12:W. The engine is air-cooled. A
blocked cooling system can damage the engine.
Clean the engine's air intake after 50 hours of op-
eration. More meticulous cleaning of the cooling
system is carried out during each basic service.
5.13 Lubrication
All lubrication points in accordance with the table
below must be lubricated every 50 hours of opera-
tion as well as after every wash.
Object
Action
Wheel bear-
2 grease nipples.
ing
Use a grease gun filled with
universal grease. Pump until
the grease emerges.
Centre point 4 grease nipples.
Use a grease gun filled with
universal grease. Pump until
the grease emerges.
Steering
Brush the chains clean with a
chains
wire brush.
Lubricate with universal
chain spray.
Tensioning
Lubricate the bearing points
arms
with an oil can when each
control is activated.
Ideally carried out by two
people.
Control
Lubricate the cable ends with
cables
an oil can when each control
is activated.
Must be carried out by two
people.
66
ENGLISH
5.14 Fuses
If any of the faults listed below occurs, replace the
relevant fuse. See fig. 13.
Fault
The engine does not start or starts and
stops immediately. The battery is
charged.
Electrical cutting height adjustment
do not work.
All electrical functions are out of
operation. The battery is charged.
Fig-
ure
27
6 PATENT - DESIGN REGISTRA-
28
This machine or parts thereof is covered by the fol-
lowing patent and design registration:
SE9901091-0, SE9901730-3, SE9401745-6,
-
US595 7497, FR772384, DE69520215.4,
GB772384, SE0301072-5, SE04/000239 (PCT),
SE0401554-1, SE0501599-5.
29
30
GGP reserves the right to make alterations to the
product without prior notification.
Fuse
10 A
20 A
30 A
TION
Advertisement
Table of Contents
