Fortigate-5050 Front Panel - Fortinet FortiGate-5000 Introduction Manual

FortiGate-5050 front panel

FortiGate-5050 front panel
24
Figure 5 shows the front of a FortiGate-5050 chassis. Two FortiSwitch-5003 boards are
installed in slots 1 and 2. Three FortiGate-5001SX boards are installed in slots 3, 4, and 5.
The FortiGate-5050 primary and secondary Shelf Managers and the Shelf Alarm Panel
(SAP) are also visible. The factory installed shelf alarm panel displays alarms, provides a
telco alarm interface, and also provides serial connections to the shelf managers. The
factory installed shelf managers provide power distribution, cooling, alarms, and shelf
status for the FortiGate-5050 chassis.
Figure 5: FortiGate-5050 front panel with FortiGate-5001SX and FortiSwitch-5003 boards
installed
5
FortiGate-5001SX
boards
4
slots 3, 4,
and 5
3
2
FortiSwitch-5003
boards
1
slots 1 and 2
SMC
2
Secondary
Shelf Manager
Also visible on the front of the FortiGate-5050:
• The location of the hot swappable FortiGate-5050 cooling fan tray behind panel.
• Power LED.
• ESD socket, used for connecting an ESD wrist or ankle band when working with the
chassis.
Caution: Do not operate the FortiGate-5050 chassis with open slots on the front panel. For
optimum cooling performance and safety, the slots must contain a FortiGate-5000 series
board or an air baffle slot filler. As well the removable power supply panel must be installed
over the power connectors on the back of the chassis.
USB
1 2 3 4
CONSOLE
ACC
PWR
USB
1 2 3 4
CONSOLE
PWR ACC
USB
CONSOLE 1 2 3 4
PWR ACC
5050SAP
5000SM
10/100
link/Act SERIAL
10/100
1
link/Act
Shelf Alarm
Panel (SAP)
(SMC 2)
FortiGate-5050-R chassis
5 6 7 8
STA IPM
5 6 7 8
STA IPM
5 6 7 8
STA IPM
POWER
5000SM
SMC
10/100
SERIAL link/Act
10/100
2 1
link/Act
ESD socket
Primary
Shelf Manager
(SMC 1)
FortiGate-5000 Series Introduction
01-30000-83466-20090108
http://docs.fortinet.com/
Hot-swappable
cooling fan tray
Power LED
• Feedback