Physical Description Of The Fortigate-5140 Chassis - Fortinet FortiGate-5000 Introduction Manual

Physical description of the FortiGate-5140 chassis

Physical description of the FortiGate-5140 chassis
18
The power entry modules are hot swappable, which means you can remove and replace a
defective PEM while the FortiGate-5140 is operating assuming that the FortiGate-5140
system has both PEMs connected to DC power for redundancy.
The back panel also includes the back cable tray, an ESD socket and the chassis ground
connector. The ground connector must be connected to Data Center ground. Use the back
cable tray for securing and managing DC power, RTN, and ground wires.
The FortiGate-5140 chassis is a 12U chassis that can be installed in a standard 19-inch
rack. Table 2 describes the physical characteristics of the FortiGate-5140 chassis.
Table 2: FortiGate-5140 chassis physical description
Dimensions
Shipping weight
completely assembled
with packaging
Operating environment
Storage environment
Power consumption
Power input
21 x 19 x 20.6 in. (53.3 x 48.3 x 52.4 cm)
(Height x Width x Depth)
110 lb. (50 kg)
Temperature: 32 to 104°F (5 to 45°C)
Relative humidity: 5 to 85% (Non-condensing)
Temperature: -13 to 158°F (-25 to 70°C)
Relative humidity: 5 to 85% (Non-condensing)
Maximum: 2,980W DC
2x redundant -37VDC to -72VDC, 30A per power feed (total 4 + 4
power feeds)
FortiGate-5140-R chassis
FortiGate-5000 Series Introduction
01-30000-83466-20090108
http://docs.fortinet.com/ • Feedback