Fortigate-5140 Chassis Front Panel - Fortinet FortiGate-5000 Introduction Manual

FortiGate-5140 chassis front panel

FortiGate-5140 chassis front panel
16
Figure 1 shows the front panel of a FortiGate-5140 chassis. Two FortiSwitch-5003A
boards are installed in slots 1 and 2. Twelve FortiGate-5001A-DW boards installed in slots
3 to 14.
Figure 1: FortiGate-5140 chassis front panel with FortiGate-5001A-DW and FortiSwitch-5003A
boards installed
FortiGate-5001A-DW
boards
FortiSwitch-5003A
slots 3, 5, 7, 9,
11, and 13
slots 1 and 2
13 11 9 7 5
FILTER
0
FAN TRAY
The FortiGate-5140 shelf alarm panel (SAP) and primary and secondary FortiGate-5140
Shelf Managers are also visible. The factory installed shelf alarm panel displays alarms,
provides a telco alarm interface, and also provides serial connections to the shelf
managers. The factory installed shelf managers provide power distribution, cooling,
alarms, and shelf status for the FortiGate-5140 chassis.
Caution: Do not operate the FortiGate-5140 chassis with open slots on the front panel. For
optimum cooling performance and safety, the slots must contain a FortiGate-5000 series
board or an air baffle slot filler. As well the removable terminal block cover must be installed
over the power connectors on the back of the chassis.
FortiGate-5001A-DW
boards
slots 4, 6, 8, 10,
boards
12, and 14
5140SAP
SERIAL 1 SERIAL 2
5140
3 1 2 4 6 8 10
1 2
FAN TRAY FAN TRAY
FortiGate-5140-R chassis
ESD socket
Shelf alarm
ALARM
panel (SAP)
12 14
Slot
numbers
ETH0 ETH1
Primary
ETH0
Service
RESET
shelf manager
STATUS
Hot Swap
1 2
ETH0 ETH1
Secondary
ETH0
Service
shelf manager
RESET
STATUS
Hot Swap
Front accessible
air filter
Front cable
tray
Cooling fan
trays 0, 1, 2
FortiGate-5000 Series Introduction
01-30000-83466-20090108
http://docs.fortinet.com/ • Feedback