Delay Page; Fig 7-7: Sci Delay Screen - Sonifex Redbox RB-VHDMA8 User Handbook Manual

7
SCI
Termination: Only available on the the RB-VHCMD16, these controls select the output
termination from between 75 and 110Ω.

Delay Page

Fig 7-7: SCi Delay Screen

This page allows control over the video delay through the unit. This control is only
available in the newer units running firmware V2.X.X or greater.
The amount of delay through the unit can be expressed in either lines or frames. The
maximum number of which is determined by the current video format being received by
the unit. When the input rate changes the maximum delay value is updated.
Mode: Selects between Line or Frame delay mode.
Delay Edit: This is where the actual delay valued can be entered. This value is represented
on the slide bar below, which can also be altered to configure the delay value.
Current Delay: This label displays the current delay value active in the unit.
67
Redbox Embedder/De-embedder User Handbook