Control Modes; Bank Mode; Channel Mode; Changing Control Mode - Sonifex Redbox RB-VHDMA8 User Handbook Manual

5
R B - V H C M D 16
5
18
6
19
7
20
8
21
9
22
10
23
11
24
12
25
13

Control Modes

There are two modes available to control the embedding and de-embedding channel
routing process. These are the BANK mode and the CHANNEL mode.

Bank Mode

In Bank mode, audio is routed on a per bank basis, so when controlling embedding, a bank
of audio is selected to be embedded into a group and when de-embedding a group of
audio is selected to be sent to a bank.

Channel Mode

In Channel mode, audio is routed on a per channel basis, this allows for maximum flexibility
when embedding and de-embedding allowing any audio input channel to be embedded
to any channel within any group. And conversely, when de-embedding, any channel within
any group can be sent to any channel of any of the available audio output banks.

Changing Control Mode

To switch between Bank and Channel control modes, simultaneously press and hold
the GROUP CHANNEL and BANK CHANNEL buttons for 5 seconds. The mode will switch
after this time and the button can be released. Bank mode is in use when both the BANK
50
Digital 2 In Ground
Digital 2 Out+
Digital 2 Out-
Digital 2 Out Ground
Digital 3 In+
Digital 3 In-
Digital 3 In Ground
Digital 3 Out+
Digital 3 Out-
Digital 3 Out Ground
Digital 4 In+
Digital 4 In-
Digital 4 In Ground
Digital 4 Out+
Digital 4 Out-
Digital 4 Out Ground
Do not connect
Digital 6 In Ground
Digital 6 Out+
Digital 6 Out-
Digital 6 Out Ground
Digital 7 In+
Digital 7 In-
Digital 7 In Ground
Digital 7 Out+
Digital 7 Out-
Digital 7 Out Ground
Digital 8 In+
Digital 8 In-
Digital 8 In Ground
Digital 8 Out+
Digital 8 Out-
Digital 8 Out Ground
Do not connect
Redbox Embedder/De-embedder User Handbook