3
R B - V H E M A 8
RB-VHEMA8 D-type Pin-out
Pin No.
1
14
2
15
3
16
4
17
5
18
6
19
7 to 13
20 to 25
Control Modes
There are two modes available to control the embedding channel routing process. These
are the BANK mode and the CHANNEL mode.
Bank Mode
In Bank mode, audio is routed on a per bank basis, so when controlling embedding, a bank
of audio is selected to be embedded into a group.
Channel Mode
In Channel mode, audio is routed on a per channel basis. This allows for maximum
flexibility when embedding, allowing any audio input channel to be embedded to any
channel within any group.
Changing Control Mode
To switch between Bank and Channel control modes, simultaneously press and hold
the GROUP CHANNEL and BANK CHANNEL buttons for 5 seconds. The mode will switch
20
Function
Embed Bank 1
Channel 1+
Channel 1-
Channel 1 Ground
Channel 2+
Channel 2-
Channel 2 Ground
Channel 3+
Channel 3-
Channel 3 Ground
Channel 4+
Channel 4-
Channel 4 Ground
Do not connect
Do not connect
Function
Embed Bank 2
Channel 1+
Channel 1-
Channel 1 Ground
Channel 2+
Channel 2-
Channel 2 Ground
Channel 3+
Channel 3-
Channel 3 Ground
Channel 4+
Channel 4-
Channel 4 Ground
Do not connect
Do not connect
Redbox Embedder/De-embedder User Handbook