Remote Interface Commands & Responses Protocol; Command Format; Remote Control Commands - Sonifex Redbox RB-VHDMA8 User Handbook Manual

Remote Interface Commands & Responses Protocol
Sonifex SCi remote control software handles all communication with the unit via a
convenient graphical user interface. However, this protocol is provided for those users who
wish to develop their own remote control applications or communicate with the unit using
a text-based terminal program.

Command Format

Commands are case-insensitive and should be terminated in a carriage return character, a
line feed character may be sent but it will be ignored. Further commands sent before the
first command is acknowledged will be ignored. Responses will be CR & LF terminated.

Remote Control Commands

Command
BOP:b,o,v
COM:b,d,p,s
CTM:m
DEL:o,g,e
DWN:
Redbox Embedder/De-embedder User Handbook
Description
Bank Option
b is the bank
o is the option
0 = SRC Disable for input channels 1/2
1 = SRC Disable for input channels 3/4
2 = Input channels 1/2 Termination
3 = Input channels 3/4 Termination
4 = Output channels 1/2 Termination
5 = Output channels 3/4 Termination
v is the option value
0 = off
1 = on
Serial Port Settings
b is the baud rate (9600, 19200, 38400,
57600 and 115200)
d is the data bits (7 or 8)
p is the parity (N, O, E)
s is the stop bits (1 or 2)
Control Mode
m is the mode
0 = bank
1 = channel
Delete Audio Group
o is the output (0 or 1)
g is the group (0 to 3)
e is the option
0 = don't delete
1 = delete
Initiates a Firmware Update
R B - V H C M D 1 6
Response
ACK:
ACK:
ACK:
ACK:
5
55