Safety Information; Safety Of Mains Operated Equipment; Voltage Setting Checks; Fuse Rating - Sonifex Redbox RB-VHDMA8 User Handbook Manual

Embedders & de-embedders
Hide thumbs Also See for Redbox RB-VHDMA8:
Table of Contents

Advertisement

SAFETY INFORMATION

Safety Information

Safety of Mains Operated Equipment

This equipment has been designed to meet the safety regulations currently
advised in the country of purchase and it conforms to the safety regulations
specified by use of the CE Mark.
Warning : There are no user serviceable parts inside the equipment. If you should ever
need to look inside the unit, always disconnect the mains supply before removing the
equipment covers.

Voltage Setting Checks

Ensure that the machine operating voltage is correct for your mains power supply by
checking the box in which your Redbox was supplied. The voltage is shown on the box
label. This product is continuously rated 85 - 264 VAC, 47 - 63Hz. Please note that all
Redboxes are either switchable between 115V and 230V, or have a universal power supply.

Fuse Rating

The Redbox Embedder/De-embedder is supplied with a single fuse in the live conducting
path of the mains power input. For reasons of safety it is important that the correct rating
and type of fuse is used. Incorrectly rated fuses could present a possible fire hazard, under
equipment fault conditions. The fuse rating for the Redbox Embedder/De-embedder is:
Continuously rated 85 - 264 VAC, 47 - 63Hz - 2A, 5 x 20mm SB
The active fuse is fitted on the outside rear panel of the unit.

Power Cable and Connection

An IEC power connector is supplied with the Redbox Embedder/De-embedder which has a
moulded plug attached – this is a legal requirement. If no moulded plug has been supplied
with your Redbox Embedder/De-embedder, please contact your supplier, because an IEC
connector is always supplied from the Sonifex factory.
If for any reason, you need to use the Redbox Embedder/De-embedder with a different
power cable, you should use the following wiring guidelines.
Wire Colour
Green, or green and yellow
Blue, or Black
Brown, or Red

Fig B: Power Connections

Connect the equipment in accordance with the connection details and before applying
power to the unit, check that the machine has the correct operating voltage for your mains
power supply.
Important Note : The terminal marked on the rear panel must be earthed.
iv
Connection
Earth (E)
Neutral (N)
Live (L)
Redbox Embedder/De-embedder User Handbook

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Redbox rb-vhcma4Redbox rb-vhema8Redbox rb-vhcmd16

Table of Contents