Audio Outputs Page; Fig 7-6: Sci Audio Outputs Screen - Sonifex Redbox RB-VHDMA8 User Handbook Manual

7
SCI
Gain Slide Bars: Controls the input gain or attenuation for each input channel. Can be set
from -24 dB to +24 dB in 0.5 dB steps. Double clicking the gain value label at the bottom of
the slide bar will set the gain to 0 dB.
Link: If selected, the gain slide bars are linked together so that changing one will change
the others in that bank.
SRC Disable: Only available on the RB-VHCMD16, these controls allow you to disable
sample rate conversion on each input.
Termination: Only available on the the RB-VHCMD16, these controls select the input
termination from between 75 and 110Ω.

Audio Outputs Page

Fig 7-6: SCi Audio Outputs Screen

This page allows you to configure the audio outputs for the available De-Embed banks.
This page is not available on the RB-VHEMA8 unit.
Gain Slide Bars: Controls the output gain or attenuation for each output channel. Can
be set from -24 dB to +24 dB in 0.5 dB steps. Double clicking the gain value label at the
bottom of the slide bar will set the gain to 0 dB.
Link: If selected, the gain slide bars are linked together so that changing one will change
the others in that bank.
66
Redbox Embedder/De-embedder User Handbook