Rear Panel Connections; Remote Control; Fig 4-3: Rb-Vhcma4 Front Panel - Sonifex Redbox RB-VHDMA8 User Handbook Manual

Embedders & de-embedders
Hide thumbs Also See for Redbox RB-VHDMA8:
Table of Contents

Advertisement

4
R B - V H C M A 4
Audio Group Detection
The four audio group indicators associated with the STATUS button display the audio
groups present in the SDI input. If an audio group is present, its relevant indicator will be
lit. This is useful to determine which groups require deleting or which groups are available
for embedding.
Lock Indicator
The lock indicator is lit when the the SDI receiver has detected and locked to the incoming
video format. If the input is disconnected or is intermittent then the lock indicator will stay
unlit.
Output Indicators
These two indicators are used to indicate which one of the two outputs are selected when
configuring the embedding routing or when configuring audio packets for deletion.

Rear Panel Connections

De-embed
Embed
Bank
Bank Unbal
Bank
SDI
SDI Outputs
Bal I/O
Outputs
Unbal Inputs
IN
1 and 2
RS232
Power
Ethernet Fuse

Fig 4-3: RB-VHCMA4 Front Panel

Mains Power
Power is applied via a standard three-pin IEC male socket. Mains voltages between 85V
and264V AC and frequencies between 47 and 63Hz are accepted without adjustment. A
2A, 5 x 20mm SB fuse is used. The Earth pin MUST be connected to ensure safety.

Remote Control

The unit can be controlled remotely either by serial RS-232 or Ethernet using the Sonifex
SCi software. Using remote control allows the user to monitor the status of the unit and
also set various options and settings not available via the front panel.
30
Redbox Embedder/De-embedder User Handbook

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Redbox rb-vhcma4Redbox rb-vhema8Redbox rb-vhcmd16

Table of Contents