Technical Specifications Rb-Sl2 - Sonifex Redbox RB-SS10 User Handbook Manual

8
MICROPHONE AMPLIFIERS
& LI MI TE RS

Technical Specifications RB-SL2

Audio Specifications
Maximum Input Level:
Maximum Output Level:
Input Impedance:
Output Impedance:
Input Gain:
Limit Threshold:
Frequency Response:
Noise:
Distortion:
Common Mode Rejection:
Connections
Inputs:
Outputs:
Mains Input:
Fuse Rating:
Equipment Type
RB-SL2:
Physical Specifications
Dimensions (Raw):
Dimensions (Boxed):
Weight:
52
+28dBu
+28dBu
>20kΩ bridging
<50Ω
Adjustable -8dBu to +18dBu gain
Adjustable -8dBu to +28dBu
20Hz to 20kHz ±0.1dB (600Ω load, ref 1kHz)
-100dB unity gain, ref +8dBu
0.01% THD @ 1kHz ref +8dBu output,
threshold set at +10dBu
>66dB typically
2 x XLR 3 pin female (Balanced, can be unbalanced)
2 x XLR 3 pin male (Balanced, can be unbalanced)
Filtered IEC, 110V-120V, or 220-240V switchable,
fused, 6W maximum
Anti-surge fuse 100mA 20 x 5mm (230VAC)
Anti-surge fuse 250mA 20 x 5mm (115VAC)
Twin mono, or stereo, limiter
28cm (W) x 10.8cm (D) x 4.2cm (H) (1U)
11" (W) x 4.3" (D) x 1.7" (H) (1U)
36cm (W) x 20.5cm (D) x 6cm (H)
14.2" (W) x 8" (D) x 2.4" (H)
Nett: 1.0kg Gross: 1.45kg
Nett: 2.2lbs Gross: 3.2lbs
Redbox User Handbook No 3