Technical Specifications Rb-Ssml1 - Sonifex Redbox RB-SS10 User Handbook Manual

4
MIXER & SOURCE SELEC TORS

Technical Specifications RB-SSML1

Audio Specifications (Bypass Mode)
Maximum Input Level:
Input Impedance:
Maximum Output Level:
Output Impedance:
Headphone Output Level:
Low Frequency Roll-Off:
Gain Range (mic):
Volume Control (line):
E.I.N:
Distortion:
Common Mode Rejection:
Phantom Power:
Frequency Response:
Connections
Mic Input:
Stereo Line Input:
Stereo Monitor Input:
Stereo Output:
Headphone Outputs:
Mains Input:
Fuse Rating:
Equipment Type
RB-SSML1:
Physical Specifications
Dimensions (Raw):
Dimensions (Boxed):
Weight:
30
-10dBu (mic), +28dBu (line), electronically balanced
20kΩ nominal balanced
+28dBu
<50Ω
Drives 150mW into 32Ω to 600Ω headphones
125Hz @ 6dB/octave
Adjustable 36dB to 75dB gain (-80dB volume min.)
-80dB to +6dB gain (+16dB with additional input gain)
130dB
<0.02% THD @ 1kHz, ref +8dBu output
>66dB typically
48V
20Hz to 20kHz ±0.3dB (600Ω load, ref 1kHz)
1 x XLR 3 pin female (Balanced)
2 x XLR 3 pin female (Balanced, can be unbalanced)
2 x XLR 3 pin female (Balanced, can be unbalanced)
2 x XLR 3 pin male (Balanced, can be unbalanced)
2 x ¼" (6.35mm) A/B gauge 3-pole stereo jack sockets
Filtered IEC, 110V-120V, or 220-240V switchable, fused,
9W maximum
Anti-surge fuse 100mA 20 x 5mm (230VAC)
Anti-surge fuse 250mA 20 x 5mm (115VAC)
Mic/Line source selector with compressor limiter
48cm (W) x 10.8cm (D) x 4.2cm (H) (1U)
19" (W) x 4.3" (D) x 1.7" (H) (1U)
53cm (W) x 20.5cm (D) x 6cm (H)
21" (W) x 8" (D) x 2.4" (H)
Nett: 1.3kg Gross: 2.0kg
Nett: 2.9lbs Gross: 4.4lbs
Redbox User Handbook No 3