Returning The Warranty Card; Safety Information; Safety Of Mains Operated Equipment; Voltage Setting Checks - Sonifex Redbox RB-SS10 User Handbook Manual

Mixers & source selectors, microphone amplifiers, stereo to mono converters, general interfaces
Hide thumbs Also See for Redbox RB-SS10:
Table of Contents

Advertisement

Each Redbox is shipped in protective packaging and should be inspected for damage before
use. Where an item is found to have transit damage, notify the carrier immediately with all
the relevant details of the shipment. Packing materials should be kept for inspection and
also for if the product needs to be returned.

Returning the Warranty Card

In order to register the date of purchase so that we can keep you informed of any design
improvements or modifications, it is important to complete the warranty registration
document that is enclosed and return it to Sonifex Ltd in the UK, or register online at
www.sonifex.co.uk/register
For your own records you should write down the serial number (which can be found on the
rear of the Redbox).
Serial Number

Safety Information

Safety of Mains Operated Equipment

This equipment has been designed to meet the safety regulations currently advised
in the country of purchase and it conforms to the safety regulations specified by
use of the CE Mark.
Warning : There are no user serviceable parts inside the equipment. If you should ever
need to look inside the unit, always disconnect the mains supply before removing the
equipment covers.

Voltage Setting Checks

Ensure that the machine operating voltage is correct for your mains power supply by
checking the box in which your Redbox was supplied. The voltage is shown on the box label.
The available voltage settings are 115V, or 230V. Please note that all Redboxes are either
switchable between 115V and 230V, or have a universal power supply.

Fuse Rating

The Redboxes are supplied with a single fuse in the live conducting path of the power
infeed at the power supply. For reasons of safety it is important that the correct rating
and type of fuse is used. Incorrectly rated fuses could present a possible fire hazard, under
equipment fault conditions. See the Technical Specifications of each product for the fuse
rating. The active fuse is fitted on the outside rear panel of the unit.
Redbox User Handbook No 3
S A F E T Y & I N S TA L L AT I O N
.............................................
INFORMATION
iii

Advertisement

Table of Contents
loading

Table of Contents