System Block Diagram; Front Panel Indicators & Controls; Illuminated Push Buttons; Fig 1-2: Rb-Ss10 System Block Diagram - Sonifex Redbox RB-SS10 User Handbook Manual

1
MIXER & SOURCE SELEC TORS

System Block Diagram

1
Audio
Inputs
2
Audio
Inputs
3-6
Audio
Inputs
7-10

Fig 1-2: RB-SS10 System Block Diagram.

Front Panel Indicators & Controls
Power LED
Indication

Fig 1-3: RB-SS10 Front Panel.

Illuminated Push Buttons

The front panel contains 10 illuminated push buttons, used for selecting an analogue
source. The push button illuminates when the input is selected. The status of pin 12 on the
remote connector determines whether the unit is in the selector mode, or the mix mode.
When pin 12 is connected to 0V, mix mode is enabled.
In selector mode, one push of a button will select the desired analogue stereo source and
pushing the button again will turn it off.
2
Inputs
Remote
L
Start I/O
R
L
R
Input Gain
Stage
x10
L
R
Remote Select/
Switch Inputs
MCU
Analogue
Switches
Illuminated
Push Buttons
Front Panel
Gain Controls
Underneath
Designation Strip
Push Button
Switches
Status
Outputs
Outputs
Volume
Headphone
Outputs
L
Outputs
R
Headphone Volume
Output Control
Redbox User Handbook No 3