Technical Specifications Rb-Dma2 - Sonifex Redbox RB-SS10 User Handbook Manual

6
MICROPHONE AMPLIFIERS
& LI MI TE RS

Technical Specifications RB-DMA2

Connections
Analogue Mic Inputs:
Analogue Line Outputs:
Digital Sync Inputs:
Digital Outputs:
Mains Input:
Fuse Rating:
Audio Specification
Min/Max Input Level:
Input Impedance:
Gain Range:
Signal to Noise:
Dynamic Range:
Distortion and Noise:
Phantom Power:
Low Frequency Roll-off:
Analogue Output Level:
Operational Controls & Indicators
Bit Depth:
Digital Output Select:
Sample Frequencies:
42
2 x XLR 3 pin (balanced)
2 x XLR 3 pin (balanced)
1 x AES/EBU XLR 3 pin female
1 x S/PDIF RCA phono
1 x TTL BNC female (sync) 50 ohm impedance
1 x AES/EBU XLR 3 pin plug
1 x S/PDIF RCA phono socket
Filtered IEC, 110-120V, or 220-240V switchable,
fused 10W max
Anti-surge fuse 100mA 20 x 5mm (230VAC)
Anti-surge fuse 250mA 20 x 5mm (115VAC)
-63dBu / 5dBu to give FSD
2kΩ nominal balanced
68dB
128dB EIN
>110dB
< 0.01% THD + N absolute @ 1kHz
+48V
125Hz @ 6dB/octave
+18dBu Ref. FSD
16, 20 or 24 bits via DIP switch
AES/EBU or S/PDIF, via push-switch
32kHz – 96kHz, via rotary switch
Redbox User Handbook No 3