Remote Select/Switch Inputs; Fig 1-7: Connection Example; Fig 1-8: Remote Select/Switch Input Connections - Sonifex Redbox RB-SS10 User Handbook Manual

The collector connects to the start pin of the equipment, and the emitter connects to the
common pin of the equipment.
Start Output
Collector 1 to 10
(Pins 1 to 10)
Start Output
Emitter 1 to 10
(Pins 14 to 23)

Fig 1-7: Connection Example.

Remote Select/Switch Inputs

This 25 way D-type socket (female) connector contains the front panel inhibit input
connection and the remote switch inputs to control the channel selection.
Pin No. I/O
Pin 1 I
Pin 2 I
Pin 3 I
Pin 4 I
Pin 5 I
Pin 6 I
Pin 7 I
Pin 8 I
Pin 9 I
Pin 10 I
Pin 11 I
Pin 12 I
Pin 13 -
Pins 14 to 25 -

Fig 1-8: Remote Select/Switch Input Connections.

Redbox User Handbook No 3
MIXER & SOURCE SELEC TORS
Play
Command
Command
Common
Description
Remote input 1 – active low to ground
Remote input 2 – active low to ground
Remote input 3 – active low to ground
Remote input 4 – active low to ground
Remote input 5 – active low to ground
Remote input 6 – active low to ground
Remote input 7 – active low to ground
Remote input 8 – active low to ground
Remote input 9 – active low to ground
Remote input 10 – active low to ground
Front panel inhibit signal – active low to ground
Mix Mode – active low to ground
No internal connection
Signal ground
1
7