Fig D: Rb-Rk1Small Redbox Front Rack-Mount Kit; Fig E: Rb-Rk2 Small Redbox Rear; Fig F: Rb-Rk3 Large Redbox Rear - Sonifex Redbox RB-SS10 User Handbook Manual

They can also be rack-mounted, with either the front, or rear of the Redbox positioned at the
front of the rack:
Front Mounting Redboxes: For rack mounting smaller (28cm) units the optional RB-RK1
(Red) or RB-RK1B (Black) kit can be used (which include 4 off M6 panel fixing screws).

Fig D: RB-RK1Small Redbox Front Rack-mount Kit .

Wherever you see this symbol an RB-RK1 front panel rack kit can be used :
Rear Mounting Redboxes: For rear panel mounting you can use either the RB-RK2, or
RB-RK3, depending on the size of your Redbox.
RB-RK2 1U rear panel rack kit for small Redbox range, e.g., RB-BL2
Fig E: RB-RK2 Small Redbox Rear Rack-mount Kit.
e.g. for fitting an RB-BL2:
Wherever you see this symbol an RB-RK2 small Redbox rear panel 19" rack kit can be used :
RB-RK3 1U rear panel rack kit for large Redbox range, e.g., RB-DA6
Fig F: RB-RK3 Large Redbox Rear Rack-mount Kit.
e.g. for fitting an RB-DA6:
Wherever you see this symbol an RB-RK3 large Redbox rear panel 19" rack kit can be used :
Note: When fitting the rear-mounting rack-kits, a notch has been
left on the inside of the right-hand rack-piece for the mains cable to
pass through. Make sure that the mains cable has been put through
the notch before attaching the right hand rack-piece.
Redbox User Handbook No 3
S A F E T Y & I N S TA L L AT I O N
INFORMATION
v