Rfid Demo - Socket CF RFID Reader Card User Manual

Table of Contents

This chapter explains how to use the Socket Mobile RFID Demo

application with the CF RFID Reader Card to perform the

following:

• Read an RFID Tag.

• Enable Loop Mode.

• Select Tag Type.

• Advanced – Write to Tag.

Before you begin using the Socket Mobile RFID Demo application, make sure you

have done the following:

• Installed the RFID Demo application onto your device, following the same

software installation procedure described in Chapter 2.

• Inserted the CF RFID Reader Card into your device.

• When you use this application, you should only trigger the RFID Reader Card

by tapping on the Select Tags or Read Tag button on the RFID Demo screen.

5 | RFID Demo

Table of Contents

Do you have a question about the CF RFID Reader Card and is the answer not in the manual?

Cf rfid reader-scan card 6p Cf rfid reader card 6e