Socket CF RFID Reader Card User Manual page 27

When data is read, a beep should sound indicating a good read, and data should
appear in your application.
For example, in an Excel Mobile spreadsheet, data should appear in the cell you
highlighted. The next cell should now be highlighted, ready for the next scan/read.
If the card fails to read data within a few seconds, you must try again.
Note: By default, the RFID reader will return the tag ID. The RFID Setup utility
can be used so that the RFID Reader-Scan Card returns only the tag data, or
the tag ID plus the tag data. (See the next page for instructions.)
CHAPTER 3: SETUP FOR NON-SOMO PDAS 27