Socket CF RFID Reader Card User Manual page 17

When data is read, a beep should sound indicating a good read, and data should appear
in your application.
For example, in an Excel Mobile spreadsheet, data should appear in the cell you
highlighted. The next cell should now be highlighted, ready for the next scan/read.
If the card fails to read data within a few seconds, you must try again.
Note: By default, the RFID reader will return the tag ID. The RFID Setup utility can be
used so that the RFID Reader-Scan Card returns only the tag data, or the tag ID plus
the tag data. (See the next page for instructions.)
CHAPTER 2: SETUP FOR THE SOMO 17