Snom 360 Manual page 99

[
S N O M
You will also hear a short audible knocking signal behind your currently
ongoing call, indicating that another call is coming in. When you select "visual
only", the visual indication will be shown on the display and there will be no
audio indication. Set at "off", Call Waiting Indication (CWI) is disabled, which
means that only one call at a time can be handled to and from the phone.
Dialtone during Hold: Turning this setting to "on" will produce a
dial tone when a call is being held and enables the user, for example, to
dial a second number. A dial tone will not be played when this setting is
turned to "off".
Disconnect on Hook:
disconnection of a call when the handset is placed on hook, e.g., during
conference calls or in handsfree-mode, etc. This is achieved by turning
this setting off.
Call join on Xfer: When this feature is turned to "on", you will
connect an incoming call to, for example, a colleague you already have on
hold by pressing
hold to transfer the call to. If this is your usual scenario, set this feature
to "off" and use the function keys
joined! Press
Alert info playback: If you want your phone to replay audio system
messages when they are provided, set this option to "on". Additionally,
you will see a message on the display. When you set the option to "off",
you will only see the message on the display.
AOC Amount Display: If your provider supports "Advice of Charge"
(AOC) information (i.e., the costs for your call) during or at the end of the
call, you can turn on this feature by selecting one of the following options:
Select "Charged" to show the accumulated amount of the current call
on the display; select "Balance" to show the amount remaining on your
account.
3 6 0 U M
S E R
Sometimes it is useful to disable the
. You will not be able to pick one of severals calls on
and
to join them.
V 1 . 0 0 ]
A N U A L
to select the calls to be
/
snom technology AG • 99
6