Ford Vehicle Owner's Manual page 145

2. Press one of the memory buttons and hold
the button until the sound returns. That
station is now held in memory on that
button.
3. Follow the two steps above for each station
memory preset button you want to set.
NOTE: If the vehicle's battery is disconnected,
the clock and station memory preset
buttons (if programmed in auto mode)
will need to be reset.
Using the Automatic Memory Load feature
You can activate the Auto Memory Load
feature by pressing and holding the "AUTO
PRESET" button for approximately three
seconds. Auto Memory Load sets all memory
buttons in AM, FM1 and FM2 sequentially by
seeking out the first five strong stations for
the respective band and storing them in
memory buttons 1-5. (FM2 will store the
second set of strong stations from the FM
band.)
With Auto Memory Store, you can
continually set strong stations into your
memory buttons without losing your existing
memory presets, which is especially handy
while traveling. Your radio will automatically
set your memory buttons to the strong local
stations so you don't have to continually
manually tune to existing stations.
Activate Auto Memory Store by pushing the
"AUTO PRESET" button once. Your radio
will set the first five strong stations of the
band you are in (AM, FM1 or FM2) into the
memory buttons. The display will show
"AUTO", then run through the frequencies,
stopping momentarily on the stations being
set into the memory buttons. The radio is
143