The Speed Control Switches - Ford Vehicle Owner's Manual

Speed Control (If equipped)
Your vehicle has speed control, so you can
automatically maintain a constant speed above
30 mph (50 km/h). The switches to operate the
speed control are on the steering wheel.
Use of radio transmitting equipment that is not
Federal Communications Commission (FCC) or
in Canada the Canadian Radio and
Telecommunications Commission (CRTC)
approved may cause the speed control to
malfunction. Therefore, use only properly
installed FCC (CRTC in Canada) approved radio
transmitting equipment in your vehicle.

The speed control switches

To set the speed control:
1. Press and release the ON switch.
2. Accelerate to the desired speed above
30 mph (50 km/h) using the accelerator
pedal.
3. Press the SET ACCEL switch and release it
immediately to set your speed. If you keep
this switch pressed, your speed will continue
to increase.
4. Take your foot off the accelerator pedal.
Your vehicle will maintain the speed you set.
102