Lights And Bulb Replacement - Ford Vehicle Owner's Manual

However, you should know that the circuit
breakers will reset themselves and allow the
electrical parts to work again once the overload
on the circuit is removed. If the circuit breakers
continue to cut off electricity, have your vehicle's
electrical system checked.
If you replace a circuit breaker, use one with the
same amperage rating. To remove a circuit
breaker mounted in the fuse panel, grip it with
your finger and thumb and pull it straight out
of its socket.

Lights and Bulb Replacement

It is a good idea to check the operation of the
following lights frequently:
headlamps
tail lamps
brakelamps
high-mount brakelamp
hazard flasher
turn signals
license plate lamp
The alignment of your headlamps should be
checked if:
oncoming motorists frequently signal you to
turn off your vehicle's high beams when you
do not have the high beams on
the headlamps do not seem to give you
enough light to see clearly at night
the headlamp beams are pointed substantially
away from a position slightly down and to
the right
365