Setting The Station Memory Preset Buttons - Ford Vehicle Owner's Manual

Setting the Station Memory Preset buttons

Your radio is equipped with 6 station
memory buttons. These buttons can be used
to select up to 6 preset AM stations. Follow
the easy steps below to set these buttons to
the desired frequencies:
1. Tune to the desired frequency.
2. Press one of the memory buttons and hold
the button in until the sound returns. That
station is now held in memory on that
button.
3. Follow the two steps above for each station
memory preset you want to set.
NOTE: If the vehicle's battery is disconnected,
the clock and station memory preset
buttons (if programmed in auto mode)
will need to be reset.
Adjusting the tone balance and speaker
output of your radio
The "TONE" button on the right side of your
radio controls the bass and treble balance. Rotate
the control clockwise to increase the treble
response (more highs) and counterclockwise to
increase the bass response (more lows).
Clock Operation
How to view the clock mode
Press the "CLOCK" button to alternate the
frequency and time in the display. In the clock
mode, pressing any radio function will
automatically display the radio frequency for
approximately ten seconds before changing back
to the clock mode.
164