Installing Child Safety Seats - Ford Vehicle Owner's Manual

Installing Child Safety Seats

Your vehicle is equipped with a dual locking
mode retractor on the shoulder belt portion of
the combination lap/shoulder safety belt for the
front seat passenger and a dual-locking mode
retractor for rear outboard passengers.
If you choose to install a forward-facing child
safety seat or infant carrier in the front seating
positions, move vehicle seat as far back as
possible.
For seating positions equipped with a
dual-locking mode retractor, use the following
procedure:
1. Position the child seat in the center of the
passenger seat.
2. Pull down on shoulder belt, then grasp
shoulder belt and lap belt together. Figure 1.
37