Adding A Bargraph Button; Adding A Joystick Button; Setting Bargraph And Joystick Properties; Setting The Level Code - AMX G3 Firmware Instruction Manual

Adding a bargraph button

Create a new button using the
1. Press
2. Press
3. Press any button to open the Button Properties page.
4. Press
5. Select
6. Select the type of vertical bargraph you need from
7. Once the button option is selected, press
return to the Properties operation bar on the Main page.

Adding a joystick button

Create a new button using the
1. Press
2. Press
3. Press any button to open the Button Properties page.
4. Press
5. Press
Joysticks.
6. From this menu option, choose to either set the position of the joystick or align the crosshair.
7. Once the button option is selected, press
return to the Properties operation bar on the Main page.

Setting Bargraph and Joystick Properties

Use the Button Properties page to set channel, level, and button colors. You are now able to position
the joystick cross-hair in the Button Properties page. Refer to the Setting the variable text
code section on page 11, Setting the channel code section on page 10, and Setting the button colors
for channel-off conditions section on page 12 for more information.

Setting the level code

Level buttons set the device and number codes for the touch panel.
Joysticks use two level numbers. The first is for the X-axis and the second for the
Y-axis. You only need to specify the first level.
1. Press
2. Enter 1, 2, 3, or 4 in the keypad. The programming software uses device codes
1 - 4 to identify the touch panel.
3. Press
Properties page.
4. Press
G3 Firmware Design and Reference
operation bar in the
ADD
in the Edit bar to open the
BUTTON
in the
PROPERTIES BUTTON
to open the
BUTTON TYPE
to open the Button Properties page for Vertical Bargraphs.
VERTICAL BARGRAPH
operation bar in the
ADD
in the Edit bar to open the
BUTTON
in the
PROPERTIES BUTTON
to open the
BUTTON TYPE
on the Button Properties page to open the
BUTTON OPTIONS
to open a keypad and set the device number.
DEV
to save the level device number, close the keypad, and return to the Button
ENTER
to open a keypad and set the level number assigned to the device.
NUM
BUTTON
menu.
BUTTON
menu to open the
PROPERTIES
menu.
BUTTON TYPE
BUTTON OPTIONS
EXIT SAVE CHANGE
BUTTON
menu.
BUTTON
menu to open the
PROPERTIES
menu and select
BUTTON TYPE
EXIT SAVE CHANGE
Designing Touch Panel Pages
menu.
operation bar.
menu.
to save the information and
menu.
operation bar.
.
JOYSTICK
menu for
BUTTON OPTION
to save the information and
13