Table of Contents
Advertisement
Editor and Setup Reference
!
!
FIG. 16 System page
The System page should only be used to purge unwanted buttons, bitmaps, icons,
fonts, and/or saved touch panel settings. Before using these features, make sure a
backup of your TPDesign project exists. If you press YES on any of the DELETE
buttons, the saved data is permanently erased from the panel's memory.
!
!
!
!
Only Rev G circuit boards allow some touch panels to handle up to 1032 KB of
extended memory.
Although the Electroluminescent panels have 256 KB memory chips, they typically
only have 233 KB available because of the baseline memory needed by the panel.
!
!
34
contact point on the panel. Repeat this several time s to confirm the accuracy of the
calibration. Press the
EXIT
POWER UP MESSAGE opens the keyboard, and enter an ASCII string to be sent to the
Central Controller when the touch panel is powered up. The Central Controller can be
programmed to perform specific operations when the message is received.
SYSTEM PAGE opens the System page (FIG. 16).
AXB-TPI/3 Touch Panel Interface has 1 MB of memory (8 MB of flash memory).
10.4 " Color-Active LCD Touch Panels have 1024 KB of memory (4 MB of flash
memory). The sample System page is has memory allocation for buttons, bitmaps, icons,
and fonts.
8.5 " Color-Passive LCD Touch Panels only display an information button for the
amount of Memory Free out of 245 KB. These types of panels have 1 MB of base
memory.
8.5 " Black/White LCD Touch Panels only display an information button for the
amount of Memory Free out of 245 KB. These types of panels have 256 KB of base
memory. The panel uses the rest of the used memory. With extended memory, these
panels can have up to 1032 Kb free.
8.5 " Electroluminescent LCD Touch Panels only display an information button for the
amount of Memory Free out of 237 KB. These types of panels have 256 KB of base
memory.
6.0 " Color Video Wall Touch Panel has 512 KB of memory available (2 MB of flash
memory). It displays information buttons for the amount of Memory Free out of 225 KB.
button when you are done with the verification.
G3 Firmware Design and Reference
Advertisement
Table of Contents
