Edit Bar - Button Menu Options - AMX G3 Firmware Instruction Manual

For two-way ViewPoints (VPN-CP), device numbers 1 through 4 can be AMX RF @
2.4 GHz. The AMX IR (38 and 455 KHz) is not supported, but other manufacturer's
(OM) IR codes are supported by assigning ViewPoint device numbers 2, 3, and 4 for
IR codes.
!
FIG. 20 Sample Wireless Settings pages for SMT-PK(M) and one-way VPT series ViewPoints
!

Edit Bar - Button Menu Options

Press
EDIT
You can use the
containing usable fonts cannot have their text or images altered because their code is locked. The
Edit bar also shows the current page name.
G3 Firmware Design and Reference
FIG. 19 Sample Wireless Settings page for WAV-PK(M)
WIRELESS SETTINGS (optional SMT-PK and SMT-PKM) opens the Wireless
Settings page (FIG. 20) for the Smart-Pack (this screen is also available on the one-way
VPT series ViewPoints). The Smart-PK module button appears to show the currently
connected wireless device. The radio frequency and infrared buttons can be modified on-
screen and work together. The
valid on the ViewPoint touch panel).
EDIT enables the Edit mode. The Protected Setup page remains open until you press
. Then, the button appears on every page. The position of the
EXIT EDIT
depends on whether you have selected
to open the Edit bar and press
menu to create, configure, and revise touch panel button settings. Buttons
BUTTON
and cannot function individually (only
AMX RF AMX IR
from the
MOVE EDIT
to open the Button drop-down menu.
BUTTON
Editor and Setup Reference
button
EDIT
menu.
PAGE
37