AMX Precis HT Instruction Manual page 29

Distribution matrix

Hide thumbs Also See for Precis HT:

Table of Contents

Cabling Video Connectors

Tip: Using lacer bars or some other type of cable management system lessens the strain from

cable weight on the connectors and makes servicing the enclosures easier.

Precis HT models can be ordered with either RCA or BNC video connectors. For component signals,

you will need to attach cables to all corresponding input and output connectors to route the entire signal.

The examples in FIG. 12 and FIG. 13 show three video cables attached for routing a three-component

signal through Output 8.

For component (wideband) video specifications, see page 33.

BNC Video Connectors

The video connectors are color coded; the white BNC connectors are inputs and the black BNC

connectors are outputs.

To attach BNC cables:

Fasten the cable connectors onto the input and output BNC connectors.

FIG. 12

Attach BNC cable onto BNC connectors

RCA Video Connectors

To attach RCA cables:

Insert the RCA plugs into the input and output RCA jacks.

FIG. 13

Insert RCA plugs into RCA jacks

Note: To cable the Precis HT for routing Y/c signals, attach the RCA or BNC cables to the

video connectors according to the screening on the rear of the enclosure.

Precis HT Instruction Manual

Installation & Setup

Table of Contents