Table of Contents
Advertisement
10. For XNConnect version 2.4.0 and greater – from the Configure menu, select Configure All.
The system automatically reboots all devices.
Or
For XNConnect versions prior to 2.4.0 – from the Configure menu, select Reboot All Devices.
11. Execute a test switch (see page 31) that includes a signal routed on the new board to ensure the
system is working correctly.
If the test switch does not execute correctly, contact technical support (see page 34).
Optima SD Instruction Manual
Appendix C – Replacing I/O Boards
75
Advertisement
Table of Contents
