Table of Contents
Advertisement
To adjust digital input gain using the BCS Absolute Method:
1.
Enter the command below. Replace the "#"s with the level and input number(s) and replace "^^^"
with the decibel level. Enter the decibel level as a decimal number to the tenth place without the
decimal point (e.g., -5 dB is entered as -50).
CL#I#VA^^^T
Example
Adjust the input gain of Input 4 to +10 dB on Level 2 (VM 2) by entering the following BCS command
line: CL2I4VA100T
Note: Alternative methods for adjusting input gain with BCS commands can be found in the "BCS
Protocol Instruction Manual."
Optima SD Instruction Manual
Stereo Audio Input/Output Boards
43
Advertisement
Table of Contents
