What Else You Need To Connect To The Network - Allied Telesis AT-1720AT User Manual

AT-1720
Card 10BASE-
Model
AT-1720T Supporte
AT- Supporte
1720AT
AT- Supporte
1720BT
AT- Supporte
1720FT
The CardAssistant diskette which contains:
— Adapter Description Files (ADF) for card
configuration
— CardAssistant software setup and diagnostic test
program
— Network adapter card drivers
— Support files for network software
— Readme files

What Else You Need to Connect to the Network

You must have an IBM PS/2 or compatible computer that meets
the following requirements:
An MCA bus computer
Approximately 32K of available RAM for the driver, depending
on the driver installed
2
Table 1: Supported Network Media
10BASE2
T
N/A
d
Supported
d with
transceiver
Supported
d
N/A
d
10BASE5 10BASE-FL
N/A
Supported
with
transceiver transceiver
N/A
N/A
N/A
Supported
with
N/A
Supported