Installation
If more than one card is installed and configured in the host when
you run CardAssistant, the configuration window displays a
column of settings for each. You can tell which column is for
which card by checking the node address. The node address
displayed agrees with the label on the card itself.
Boot ROM Socket
The AT-1720 card is shipped with an unpopulated boot ROM
socket. For a diskless workstation, the card needs a boot ROM to
allow it to load the operating system over the network. If a ROM
is installed, the Boot ROM Enable switch must be set with your
computer manufacturer's configuration software, by selecting a
ROM base address.
Boot ROMs are application-specific. Allied Telesyn supplies a
range of boot ROMs for different network environments.
Contact your Allied Telesyn representative for more
information.
13