Allied Telesis AT-1720AT User Manual page 19

AT-1720
4. Complete the installation of the network software, and
review all configuration files to verify that they match the
card's configuration.
Updating a Novell IPX workstation to ODI
Individual Novell IPX workstations on NetWare systems are
frequently converted to Novell Open Data-Link Interface (ODI)
workstations running on the same system. This conversion is
typically made because Novell no longer supports the IPX
specification, and has replaced it with the ODI specification.
Therefore, changing or updating network adapter hardware or
software on an IPX workstation will probably involve changing
the driver type from IPX to ODI.
The IPX-ODI change in no way impairs the
Note
workstation's ability to function with your original
NetWare software on the original, unchanged
network.
1. Run CardAssistant (
instructions for Install System Software, choosing
Netware DOS Workstation (ODI)
field. CardAssistant, in its default mode, creates a directory
called
\NET
,
NETX.EXE
that directory. Copying these files to your hard drive
completes the ODI installation.
2. Exit CardAssistant.
3. Use your computer manufacturer's configuration software
to configure the adapter card and backup the configuration
information. Record the configuration information on the
LAN Management Summary/Quick Reference Guide card
for future reference.
18
setup17.exe
on the workstation disk drive, copies
,
AT17ODI.COM IPXODI.COM
) and follow the
in the driver install
and
LSL.COM
,
NET.CFG
files to