Allied Telesis AT-1720AT User Manual page 14

AT-1720
The CardAssistant diagnostic routines test the board and the
configuration for functional problems. The routines are:
PC bus interface
On-board RAM
Interrupt test
Internal loopback
MAC address
Boot ROM
The diagnostic routines display whether the card passed each
test.
You can see if the board passes before connecting the computer
to the network, and then confirm that it still passes after the
network connector is plugged in. This method can help you
isolate a problem.
Viewing AT-1720 configuration with CardAssistant
1. Invoke CardAssistant if necessary. See "Invoking
CardAssistant" on page 10.
2. Select the Configured I/O Parameters View menu.
Type:
C
The displayed I/O parameters are read-only, and may not be
modified with CardAssistant.
Installing more than one card
You can install up to four Allied Telesyn adapter cards in the
same computer. Each requires its own unique I/O resources (I/O
port and IRQ).
12
.
ENTER