Driver Installation - Allied Telesis AT-1720AT User Manual

Driver Installation

The procedures for installing, binding or merging these drivers
with the network software vary with the operating system type
and version. For detailed instructions, refer to the LAN
administration manuals for your network software.
TIP: Network software manufacturers' procedures and file structures are
subject to change. This is why the adapter card manual can only provide
general guidelines on installing drivers. Additional, more up-to-date
installation notes may be found in the readme files on the CardAssistant
diskette. But for accurate, detailed information on network installation,
your network software manuals are your best source.
General steps for copying a driver to your system
Use the setup program on the CardAssistant diskette to copy
the driver.
1. Insert the diskette into the floppy disk drive and type:
floppydrive :setup17
where
floppydrive
installation diskette.
2. Select the "Installation" icon on the main menu.
3. Choose the appropriate driver from the menu choices. If
the driver you need is not listed, get help from the
file on the CardAssistant diskette.
Following the instructions on the screen, copy the driver to
a standard directory (for example LAN Manager
customarily uses
server). The CardAssistant program will create the
directory if it does not already exist and copy the necessary
files. Exit the CardAssistant program.
ENTER
is the disk drive containing the
C:\LANMAN\DRIVERS\ETHERNET
Network Adapter Card Drivers
READ.ME
for a
17