Clear Mac Address-Table Dynamic - Allied Telesis x600-24Ts Software Reference Manual

Switching Commands

clear mac address-table dynamic

Use this command to clear the filtering database of all entries learned for a given MAC address,
interface or VLAN.
Syntax
clear mac address-table dynamic [address <mac-address>|vlan <vid>|
Parameter
interface
<vid>
<port>
<mac-address>
Privileged Exec mode
Mode
Use this command with options to clear the filtering database of all entries learned for a given
Usage
MAC address, interface or VLAN. Use this command without options to clear any learned
entries. Compare this usage and operation with the clear mac address-table static
command.
This example shows how to clear all dynamically learned filtering database entries for all
Examples
interfaces, addresses, VLANs.
This example shows how to clear all dynamically learned filtering database entries when
learned through switch operation for a given MAC address.
clear mac address-table static
Related Commands
show mac address-table
15.6
interface <port>]
Description
Filtering database entries for the given port.
when filtering database entries are cleared based on VLANs.
Value range is 1-4094.
The port from which address entries will be cleared. This can be a single
port, such as port1.1.4, a static channel group, such as sa3, or an LACP
channel group, such as po4.
The mac address to be cleared from the database.
awplus# clear mac address-table dynamic
awplus# clear mac address-table dynamic address 0202.0202.0202
Software Reference for x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1 C613-50006-01 REV B