Alcatel OmniPCX Enterprise User Manual page 43

Section - RSI
localhost> set_feature 7100 routing 1
-- host : sent SetFeature 0xd84 on mcdu "7100" (rose-id=3 host=0)
localhost>
localhost> X10 is route_request
Call the RSI, then enter the command route_select X10 followed by the target, followed by 1.
localhost> route_select X10 7000 1
|Invoke: SER_ROUTE_REQUEST (rose-id=5897 host=0)
| cstaSearCrid=117559046=0x701cf06
| cstaSearRoid=5897=0x1709
| Connection 1 : (call=21,neqt=463,type=TYPE_PROVIDED:4)
| Connection 2 : (call=0,neqt=0,type=TYPE_NOT_PROVIDED)
|
| (PRIVATE)
| cstaSearFilt=0x00000000 0x00000000
| Feature : ident=0 invoke=0 val1=0 val2=0
localhost>
host : sent route select on Xref 117559046 (rose-id=7 host=0)
If the target is accessible, the ROUTE_END_REQUEST information is returned.
localhost>
Invoke: SER_ROUTE_END_REQUEST (rose-id=5898 host=0)
| cstaSearCrid=117559046=0x701cf06
| cstaSearRoid=5898=0x170a
Connection 1 : (call=0,neqt=0,type=TYPE_NOT_PROVIDED)
|
| Connection 2 : (call=0,neqt=0,type=TYPE_NOT_PROVIDED)
|
|
| cstaSearFilt=0x00000000 0x00000000
| Feature : ident=0 invoke=0 val1=0 val2=0
2.2. ccdn
The command ccdn is used to check:
- Monitoring (Monitor) of the RSI (identified when monitored by the letter T) by one or more
Tservers (an RSI can be monitored by several TServers)
- Activation (Enable) of the RSI (identified when enabled by the letter T) by a TServer (an RSI can
only be enabled by a single TServer).
Enter the command ccdn -d followed by the RSI number.
localhost>ccdn —d 7100
--------------------------------------------------------------------------------------
| Addres :
--------------------------------------------------------------------------------------
| Name : RSI | Type :
--------------------------------------------------------------------------------------
| Exploitation Category :
| External Category :
| Transactation Code Dial. Timer :
| Hold on guide number :
| Overflow Time Out :
| Cost Center :
Ed.03
A L C
Alcatel OmniPCX Enterprise
(L)Device 1 : "7100"
(L)Device 2 : "7002"
(L)Device 1 : ABSENT
(L)Device 2 : ABSENT
7100 |Lognum :
0 | Connection Category :
0 | Taxation Category :
100 | Language :
2 | Wrap Up Time :
150 | Overflow Address :
255 | Pause Time :
Ref.3EU19919ENAA
T E L
Local | Prefix :
RSI
Maintenance
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
0 |
| Node : 7 |
0 |
Justified|
1 |
6000 |
|
50 |
.41