Configuring The Ssbd - Alcatel OmniPCX Enterprise User Manual

RSI
Configuration procedure
Access number
Signalling Type
Called Number
Repeat this procedure for the second hybrid link access.
13.

Configuring the SSBD

Pre-requisite:
Ensure you have the "47xx alarm licence" in the PCX. By default, this licence is available with the Alcatel
OmniVista 4760 application.
Procedure:
The SSBD configuration procedure is described in the documentation provided with the SSBD software.
Refer to this documentation to configure the SSBD.
For information:
The following SSBD parameters must be configured:
- The RSI objects subject to synchronization. These are the objects with a directory number (on the
OmniPCX Enterprise side) or a DN (on the Genesys side), the voice guides, and the skills.
- The synchronization master (OmniPCX Enterprise or Genesys suite)
- The static synchronization mode (the static mode is required when the SSBD is installed for
the first time).
- The autoenable parameter: In case of a conflict on an object, it is indicated as disabled via
an icon in the Genesys suite CME management tool. When the problem is corrected and if this
parameter is validated, the system automatically enables the object. If this parameter is not
activated, the administrator must activate it manually once the problem is corrected.
Note: Creating, modifying, or deleting an RSI object systematically results in a log file being
created after synchronization is performed. Among other things, it indicates whether the RSI object
synchronization has passed or failed. This log file can be consulted via the SCI (Solution Control
Interface) application.
.38
A L C
Alcatel OmniPCX Enterprise
:
Enter the link access number.
:
Select: B Channel
: Leave blank.
Ref.3EU19919ENAA
T E L
Section - RSI
Ed.03